ROMPOX® - EASY is a ready-to-use 1-component pavement jointing mortar that hardens on contact with air or oxygen. Thanks to its simple application, this jointing mortar is also suitable for do-it-yourselfers and can be easily applied to all surfaces with water-permeable bedding around the house. ROMPOX® - EASY has been the solid solution for jointing paving stones and natural stone coverings for decades.
Top features:
applications |
---|
All around the house |
Areas with traffic loads of up to 3.5 tons |
Almost all coated and sensitive stones |
Paving and natural stone surfaces |
For joint widths from 5 mm |
Joint widths from 3 mm possible with greater effort |
feature |
---|
For do-it-yourselfers |
No weed growth |
Highly permeable to water |
Can be applied in drizzle |
Ready-Mixed |
Frost/de-icing salt resistant |
Resistant to high-pressure cleaners |
Firm to walk |
Easy to use |
propertyName | propertyDescription |
---|---|
Compressive strength | 7,1 N/mm² |
Bending tensile strength | 3,4 N/mm² |
Solid mortar bulk density | 1,54 kg/dm³ |
Water permeability | 2,3 l/min/m² |
Storage life | min. 24 Monate |
Storage | vor direkter Sonneneinstrahlung schützen, frostunempfindlich undefined |
ROMEX® MADE IN GERMANY
Our production site in Meckenheim near Bonn is the center of our claim to high-quality and reliable products. With our own laboratory and a modern research and development department, we set standards in the industry. This is where trend-setting products such as ROMPOX® - ECOFINE are created, which meet the requirements of modern gardening and landscaping and at the same time protect the environment.
2-component pavement jointing mortars (2K) are basically designed for heavier loads. In many cases, the use of 1-component pavement jointing mortar is sufficient for private areas. In addition, 1C pavement jointing mortar is easier and faster to apply, especially for non-professionals. You can get an overview of the different areas of application of 1C and 2C pavement jointing mortar on the following overview.
With the 1-component pavement jointing mortar, it is possible to "keep it alive" for a certain time after opening the container. To do this, fill clean water into the container until the grout is completely covered. Then close the container again. This will keep your paving grout for up to one month. Unfortunately, this is not possible with the 2-component products. Once mixed, they react completely within the processing times.
It can indeed happen that you see different sand colours from one and the same pallet when you open the Easy pails. Depending on where and how long a pallet with ROMPOX® - EASY has been stored, it can happen that the sand colour of the buckets on the outside has already changed to the later colour shade due to UV radiation. The colours equalise in the course of a few weeks.
Buckets that are on the "inside" of the pallet and are not exposed to direct UV radiation still have their original sand colour. Therefore, we write in our documents as well as on the pallets that containers/buckets must be protected from direct sunlight.
In addition, all our products and fillers are natural products that may show natural colour variations.